Machine Services Inc.: Fabricated Steel Products
Machine Services Inc.: Fabricated Steel Products
Machine Service, Inc.: Optional Features

Compartment Dividers
Bins can be divided into any configuration desired such as:
2 – halves, 3- thirds, 4- quarters, 1 – 1/4 and 1- 3/4 , 1- 1/3 and 1- 2/3’s

Door Options
Multiple top doors for divided bins or add a door at the
eave so as a grinder mixer can reach to fill

Ventilation
We offer a variety of Vent sizes to allow adequate air flow. Larger vents are required where a grain
leg is spouted into these bins.

Hopper Design
As the standard hopper slope is 48 degrees, another option available is a hopper with more slope. We realize many materials as DDG and Soybean meal require a steeper angle for better product flow. Note: When you increase the hopper slope you also increase the height of the bin. The hopper discharge can also be configured
so as to align with what ever location needs to be met; as over mixer/grinders. To align with Auger trailer compartments for one stop filling.

Blower Pipe
Blower pipe for pneumatic fill.

Bean Ladder
Bean Ladders and other seed handling accessories available upon request.

Bottom Door Options
As we have stated the 12 inch door is standard but again, we offer any size from 12 to 24 inches square or even rectangular doors for over grain cleaners/scalpers. Leverage slide, Rack and Pinion, Roller gates, Air and Electric….

Transitions
We can design and build transitions for bins with more than one door. When a bin is divided into more
than one compartment a transition is often desired to keep the material flow coming out of one place.

Door Socks
The use of a sock is for bins with greater clearance and yet the sock controls loss from the wind because
of dropping into a lower vehicle. These are easily removed and replaced on the bin.

Leg Extensions
Some circumstances require extra width in the drive thru,
thus we offer leg extensions. We will make leg extensions
for the drive through width you need.

Ladder Cage Enclosures
Safety cages are available upon request where the ladder height requires such.

Ladder Landings
Standard landings measure 24" x 32" and are located 8ft. above ground next to ladder. Provide additional safety for operator when loading grain trucks and semis. A must when bottom door is equipped with crank style opener.

Bin Level Indicators
We offer the “LevAlert” bin level indicator as an option

Machine Services Inc.: Fabricated Steel Products
Machine Service Inc.: Fabricated Steel Products

© Copyright 2008 — Machine Service, Inc. — All Rghts Reserved
site powered by: IM Design Group